Wave-in-deck loads on exposed jetties     

Giovanni Cuomo  Matteo Tirindelli  William Allsop 《Coastal Engineering》2007

This paper presents results from research on the hydraulic loadings of exposed (unsheltered) jetties (open pile piers with decks and beams). The work presented here focuses on results from physical model tests on wave-induced loads on deck and beam elements of exposed jetties and similar structures. These tests investigated the physics of the loading process, and provided new guidance on wave-in-deck loads to be used in design. Wave forces and pressures were measured on a 1:25 scale model of a jetty head with projecting elements. Structure geometry and wave conditions tested were selected after an extensive literature review (summarised in the paper) and consultation with the project steering group. Different configurations were tested to separate 2-d and 3-d effects, and to identify the effects of inundation and of down-standing beams.  相似文献   

Morphological, bathymetric and sedimentological surveys used to assess the coastline defensive measures     

A. Di Matteo  M. Milli Ph.D. 《International Journal of Environmental Science and Technology》2008,5(3):415-424

This paper outlines the results of a study recently carried out on the western coast of the Sestri Levante peninsula (Eastern Liguria-Italy), aiming to assess the effects of newly accomplished defensive measures against coastal erosion: the accretion of the beach with natural sand and its protection with artificial structures orthogonal and parallel to the shoreline. Through conventional and more innovative methodologies (respectively single beam echo sounders and global positioning system) the research work has resulted in a new evaluation of the morphological, bathymetric and sedimentological features that make up this shoreline and its volumetrical change over the century. The survey and the research carried out on the studied area have enabled us to give a more detailed picture of the evolution of the littoral, to assess the possible use of “non-traditional” techniques of beach development monitoring, to evaluate the volumetric variations of the emerged and submerged beaches, to establish the sedimentological activity of the beach after the latest nourishment measures, and finally, to verify the effectiveness of the protection measures implemented on this coastline. The acquired data have been stored in the database and a geographic information system has been used to process, analyze, and evaluate the results. The main findings show that the latest intervention has brought about a new phase in the evolution of the coastline, giving rise to a new pseudo-balanced condition. The re-distribution of materials used for the beach nourishment, leads us to believe that the defence underwater barrier has only partially worked. The main conclusion for a correct coastal zone management underline the necessity to plan local and more wide monitoring during at least 8–10 consecutive years.  相似文献   

Morphological effects of different channel‐forming discharges in a gravel‐bed river     

Nicola Surian  Luca Mao  Matteo Giacomin  Luca Ziliani 《地球表面变化过程与地形》2009,34(8):1093-1107

The study analyses the morphological response of a gravel‐bed river to discharges of different magnitude (from moderate events that occur several times a year to a 12‐year flood) and so defines the range of formative discharges for single morphological units (channels, bars, islands) and a range of magnitude of morphological activity from the threshold discharges for gravel transport and minor bar modification up to flows causing major morphological changes. The study was conducted on the Tagliamento River, a large gravel‐bed river in north‐eastern Italy, using two different methods, analysis of aerial photographs and field observation of painted gravel particles. The available photographs (five flights from August 1997 to November 2002) and the two commissioned flights (June 2006 and April 2007) do not define periods with a single flood event, but the intervals are short enough (11 to 22 months) to have a limited number of flood events in each case. The fieldwork, which involved cross‐section survey, grain‐size analysis and observation of painted sediments, complemented the aerial surveys by allowing analysis of channel response to single flood events. Substantial morphological changes (e.g. bank erosion of several tens of metres up to more than 100 m) associated with flood events with a recurrence interval between 1·1 year and 12 years have been documented. Multiple forming discharges were defined based on the activity of different morphological units. Discharges equal to 20–50% of the bankfull discharge are formative for the channels, whereas the bankfull discharge (1·1 year flood in this case of the Tagliamento River) is formative for low bars. Larger floods, but still relatively frequent (with a recurrence interval less than five years), are required for full gravel transport on high bars and significant morphological changes of islands. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

The magmatic feeding system of El Reventador volcano (Sub-Andean zone,Ecuador) constrained by texture,mineralogy and thermobarometry of the 2002 erupted products   总被引：6，自引：0，他引：6  

Filippo Ridolfi  Matteo Puerini  Alberto Renzulli  Michele Menna  Theofilos Toulkeridis 《Journal of Volcanology and Geothermal Research》2008

After a 26 years long quiescence El Reventador, an active volcano of the rear-arc zone of Ecuador, entered a new eruptive cycle which lasted from 3 November to mid December 2002. The initial sub-Plinian activity (VEI 4 with andesite pyroclastic falls and flows) shifted on 6 and 21 November to an effusive stage characterized by the emission of two lava flows (andesite to low-silica andesite Lava-1 and basaltic andesite Lava-2) containing abundant gabbro cumulates. The erupted products are medium to high-K calc-alkaline and were investigated with respect to major element oxides, mineral chemistry, texture and thermobarometry. Inferred pre-eruptive magmatic processes are dominated by the intrusion of a high-T mafic magma (possibly up to 1165 ± 15 °C) into an andesite reservoir, acting as magma mixing and trigger for the eruption. Before this refilling, the andesite magma chamber was characterized by water content of 5.3 ± 1.0%, high oxygen fugacity (> NNO + 2) and temperatures, in the upper and lower part of the reservoir, of 850 and 952 ± 65 °C respectively. Accurate amphibole-based barometry constrains the magma chamber depth between 8.2 and 11.3 km (± 2.2 km). The 6 October 2002 seismic swarm (hypocenters from 10 to 11 km) preceding El Reventador eruption, supports the intrusion of magmas at these depths. The widespread occurrence of disequilibrium features in most of the andesites (e.g. complex mineral zoning and phase overgrowths) indicates that convective self-mixing have been operating together with fractional crystallization (inferred from the cognate gabbro cumulates) before the injection of the basic magma which then gave rise to basaltic andesite and low-silica andesite hybrid layers. Magma mixing in the shallow chamber is inferred from the anomalous SiO₂–Al₂O₃ whole-rock pattern and strong olivine disequilibria. Both lavas show three types of amphibole breakdown rims mainly due to heating (mixing processes) and/or relatively slow syn-eruptive ascent rate (decompression) of the magmas. The lack of any disequilibrium textures in the pumices of the 3 November fall deposit suggest that pre-eruptive mixing did not occur in the roof zone of the chamber. A model of the subvolcanic feeding system of El Reventador, consistent with the intrusion of a low-Al₂O₃ crystal-rich basic magma into an already self-mixed andesite shallow reservoir, is here proposed. It is also inferred that before entering the shallow chamber the “basaltic” magma underwent a polybaric crystallization at deeper crustal levels.  相似文献   

Broadband imaging via direct inversion of blended dispersed source array data          下载免费PDF全文

Matteo Caporal  Gerrit Blacquière  Mikhail Davydenko 《Geophysical Prospecting》2018,66(5):942-953

Although seismic sources typically consist of identical broadband units alone, no physical constraint dictates the use of only one kind of device. We propose an acquisition method that involves the simultaneous exploitation of multiple types of sources during seismic surveys. It is suggested to replace (or support) traditional broadband sources with several devices individually transmitting diverse and reduced frequency bands and covering together the entire temporal and spatial bandwidth of interest. Together, these devices represent a so‐called dispersed source array. As a consequence, the use of simpler sources becomes a practical proposition for seismic acquisition. In fact, the devices dedicated to the generation of the higher frequencies may be smaller and less powerful than the conventional sources, providing the acquisition system with increased operational flexibility and decreasing its environmental impact. Offshore, we can think of more manageable boats carrying air guns of different volumes or marine vibrators generating sweeps with different frequency ranges. On land, vibrator trucks of different sizes, specifically designed for the emission of particular frequency bands, are preferred. From a manufacturing point of view, such source units guarantee a more efficient acoustic energy transmission than today's complex broadband alternatives, relaxing the low‐ versus high‐frequency compromise. Furthermore, specific attention can be addressed to choose shot densities that are optimum for different devices according to their emitted bandwidth. In fact, since the sampling requirements depend on the maximum transmitted frequencies, the appropriate number of sources dedicated to the lower frequencies is relatively small, provided the signal‐to‐noise ratio requirements are met. Additionally, the method allows to rethink the way to address the ghost problem in marine seismic acquisition, permitting to tow different sources at different depths based on the devices' individual central frequencies. As a consequence, the destructive interference of the ghost notches, including the one at 0 Hz, is largely mitigated. Furthermore, blended acquisition (also known as simultaneous source acquisition) is part of the dispersed source array concept, improving the operational flexibility, cost efficiency, and signal‐to‐noise ratio. Based on theoretical considerations and numerical data examples, the advantages of this approach and its feasibility are demonstrated.  相似文献   

Spatial organization of drumlins          下载免费PDF全文

Chris D. Clark  Jeremy C. Ely  Matteo Spagnolo  Ute Hahn  Anna L.C. Hughes  Chris R. Stokes 《地球表面变化过程与地形》2018,43(2):499-513

  相似文献   

Decoupled kinematics of two neighbouring permafrost creeping landforms in the Eastern Italian Alps     

Roberto Seppi  Luca Carturan  Alberto Carton  Thomas Zanoner  Matteo Zumiani  Federico Cazorzi  Aldo Bertone  Carlo Baroni  Maria Cristina Salvatore 《地球表面变化过程与地形》2019,44(13):2703-2719

An overall acceleration of rock glacier displacement rates in the Alps has been observed in recent decades, with several cases of destabilization leading to potential geomorphological hazards. This behaviour has been attributed to the rising permafrost temperature, induced by atmospheric warming and regulated by thermo-hydrological processes. Landforms derived from the interaction of glacier remnants and permafrost are widespread in mountain areas, but are less studied and monitored than talus rock glaciers. This work presents a comparative study of a talus rock glacier and a glacial-permafrost composite landform (GPCL) in the Eastern Italian Alps. The two landforms are only 10 km apart, but have rather different elevation ranges and main slope aspects. The kinematics and ground thermal conditions were monitored from 2001 to 2015 along with geomorphological surveys, analyses of historical maps and remote sensing data. The dynamic behaviour of the rock glacier was similar to the majority of monitored rock glaciers in the Alps, with an acceleration after 2008 and a velocity peak in 2015. In contrast, the GPCL had a nearly unchanged displacement rate during the observation period. Statistical analyses of kinematic vs. nivo-meteorological variables revealed a dynamic decoupling of the two landforms after 2008 that corresponds with increased winter snow accumulation. Although the kinematics of both landforms respond to ground surface temperature variations, the collected evidence suggests a different reaction of ground surface temperature to variations in the precipitation regime. This different reaction is likely due to local topo-climatic conditions that affect snow redistribution by wind. The different reactions of the two systems to the same climatic forcing is likely a legacy of their different origins. GPCL dynamics result from interaction of permafrost and residual glacial dynamics that are associated with possible peculiarities in the internal/basal meltwater circulation, whose future response is uncertain and requires improved understanding. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.  相似文献   

Direct and indirect capture of near-Earth asteroids in the Earth–Moon system     

Minghu Tan  Colin McInnes  Matteo Ceriotti 《Celestial Mechanics and Dynamical Astronomy》2017,129(1-2):57-88

Near-Earth asteroids have attracted attention for both scientific and commercial mission applications. Due to the fact that the Earth–Moon \(\hbox {L}_{1}\) and \(\hbox {L}_{2}\) points are candidates for gateway stations for lunar exploration, and an ideal location for space science, capturing asteroids and inserting them into periodic orbits around these points is of significant interest for the future. In this paper, we define a new type of lunar asteroid capture, termed direct capture. In this capture strategy, the candidate asteroid leaves its heliocentric orbit after an initial impulse, with its dynamics modeled using the Sun–Earth–Moon restricted four-body problem until its insertion, with a second impulse, onto the \(\hbox {L}_{2}\) stable manifold in the Earth–Moon circular restricted three-body problem. A Lambert arc in the Sun-asteroid two-body problem is used as an initial guess and a differential corrector used to generate the transfer trajectory from the asteroid’s initial obit to the stable manifold associated with Earth–Moon \(\hbox {L}_{2}\) point. Results show that the direct asteroid capture strategy needs a shorter flight time compared to an indirect asteroid capture, which couples capture in the Sun–Earth circular restricted three-body problem and subsequent transfer to the Earth–Moon circular restricted three-body problem. Finally, the direct and indirect asteroid capture strategies are also applied to consider capture of asteroids at the triangular libration points in the Earth–Moon system.  相似文献   

U–Pb zircon geochronological and petrographic constraints on late to post‐collisional Variscan magmatism and metamorphism in the Ligurian Alps,Italy     

Matteo Maino  Giorgio Dallagiovanna  Laura Gaggero  Silvio Seno  Massimo Tiepolo 《Geological Journal》2012,47(6):632-652

In the Ligurian Alps, the Barbassiria massif (a Variscan basement unit of the Briançonnais domain) is made up of orthogneisses derived from K‐rich rhyolite protoliths and minor rhyolite dykes. However, on account of subsequent Alpine deformation and a related blueschist facies metamorphic overprint that are pervasive within the Barbassiria Orthogneisses, little evidence of the earlier Variscan metamorphism is preserved. In this study, new U–Pb laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) dating of zircon from the Barbassiria Orthogneisses and dykes was undertaken to unravel the relationships between protolith magmatism and the Variscan metamorphic overprint. The results suggest a protolith age for the Barbassiria Orthogneisses of ~315–320 Ma (i.e., Early/Late Carboniferous), and constrain the age of a subsequent rhyolite dyke emplacement event to 260.2 ± 3.1 Ma (i.e., Late Permian). The Variscan high‐temperature (greenschist–amphibolite facies) metamorphic event that affected the Barbassiria Orthogneisses was likely associated with both tectonic burial and compression during the final stages of the Variscan collision during the Late Carboniferous period. Emplacement of late‐stage rhyolite dykes that cut the Barbassiria Orthogneisses is linked to a diffuse episode of Late Permian rhyolite volcanism that is commonly observed in the Ligurian Alps. The age of this dyke emplacement event followed a ~10–15 Ma Mid‐Permian gap in the volcano‐sedimentary cover sequence of the Ligurian Alps, and represents the post‐orogenic stage in this segment of the Variscides. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

High-pressure X-ray study of LiCrSi2O6 clinopyroxene and the general compressibility trends for Li-clinopyroxenes     

Benedetta Periotto  Ross J. Angel  Fabrizio Nestola  Tonci Balić-Žunić  Cinzia Fontana  Daria Pasqual  Matteo Alvaro  Günther J. Redhammer 《Physics and Chemistry of Minerals》2013,40(5):387-399

High-pressure single-crystal X-ray diffraction measurements of synthetic LiCrSi₂O₆ clinopyroxene (with space group P2₁/c) were performed in a diamond-anvil cell up to 7.970 GPa. No phase transition has been observed within the pressure range investigated, but the elastic behavior at lower pressures (up to ~2.5 GPa) is affected by an anomalous softening due to the proximity of the phase transition to the HT-C2/c phase at 330 K and at ambient pressure. A third-order Birch–Murnaghan equation of state fitted to the compression data above 2.5 GPa yields a bulk modulus K _T0 = 93(2) GPa and its first derivative K′ = 8.8(6). The structural data measured up to 7.970 GPa confirm that the space group P2₁/c is maintained throughout the whole pressure range investigated. The atomic parameters, obtained from the integrated diffraction intensities, suggest that the Li coordination polyhedron changes its coordination number from 5 to 6 at 6–7 GPa by means of the approach of the bridging O atom, related to the increased kinking of the B tetrahedral chain. Furthermore, at higher pressures, the structural evolution of LiCrSi₂O₆ provides evidence in the variation of kinking angles and bond lengths of a potential phase transition above 8 GPa to the HP-C2/c space group. A comparison of the Li-clinopyroxenes (M1 = Cr, Al, Sc, Ga, Mg + Fe) previously investigated and our sample shows that their elastic behavior and structural mechanisms of compression are analogous.  相似文献